Archive Household cots This product safety standard sets out requirements and tests for materials, design, construction, performance and labelling of household cots. The aim is to reduce the risk of injury or death to infants and babies from the use of unsafe cots. It is illegal to supply a cot that does not comply with this standard and the regulations. The regulations set out what types of cots are covered by the standard, and what parts of the standard apply to New Zealand.
The standard sets out the specifications a household cot must meet and the tests which have to be carried out to determine that the cot meets those specifications. The regulations are issued under the Fair Trading Act If you comply with the standard referred to in this fact sheet, you will meet your legal obligations under the Product Safety Regulations. Standards NZ revise standards periodically. However, your legal obligations do not change until the Product Safety Regulations are amended to refer to the revised standard.
When this happens, we will update our fact sheet to refer to the revised standard. We encourage you to review any revised standards as they may provide for additional or higher product safety protections that you may wish to take into account. Further information is available from Standards NZ. Some key features that meet the regulations Space between bars between mm No protrusions which measure more than 5mm that a child could fall on or could snag clothing for example, nuts and corner posts Minimum depth of mm from the mattress base to the lowest point on any side or end No horizontal or diagonal bars or other fixtures that would allow a child to climb over the sides Space between the cot ends and sides and mattress sides no more than 20mm when the mattress is centred Permanent warning and information label on mattress base.
Who do the regulations apply to? The regulations apply to any person who supplies, offers to supply or advertises the supply of new or second-hand household cots.
The regulations apply to private sellers and to people in trade, eg, retailers, importers, distributors and manufacturers.
What is the expiry date? Have come back into vogue, especially for the cooler winter months. The compact and sturdy design makes them well suited to childcare centres, offering safety, comfort and space-saving capabilities for years to come.
Supplying can be through displaying cots for sale in a shop, selling a cot at a garage sale or market or advertising a cot for sale on an internet auction site. Offering cots for lease, rent, or cots being given away are also types of supply and these cots must also comply with the requirements of the standard and the regulations. What types of cots are covered by the regulations? The regulations apply to new and second-hand cots designed and intended to be used in the home for a child's or infant's sleeping use.
Cots used outside the home, for example, in hotels, motels or day care centres, that are the same as those used in the home are included in the regulations.
What types of cots are not covered by the regulations? The regulations do not apply to these types of cots: What does the safety standard require? The household cots safety standard contains more details and requirements, some of which are very technical in their nature.
You should read both the regulations and the safety standard to make sure you understand all the requirements and testing. The standard gives details on the following requirements: Construction All the components of the cot must be either permanently fixed, require a tool for putting together or taking apart, or require a method of assembly that cannot be tampered with by a child within the cot.
Dimension requirements Includes specific dimensions of depth and spacing for: For a complete list of the dimension requirements you need to refer to the standard. There must be no structures or components that could be used to get a foothold or toehold for climbing.
Movement of the dropside of the cot The cot's design and fastenings have to allow free movement of the dropside of the cot. The dropside guides have to be firmly fixed. Fastening devices used to access the cot There must be either two fasteners or a system that requires two separate but simultaneous actions to access the cot. Height of the bottom rails The bottom edge of the lowest rails must not be higher than the top of the mattress base. Protrusions on either the inside or outside of the cot Nothing on the cot can protrude more than 5mm, unless it is designed so clothing cannot be caught on it.
Sharp edges and points There must be no sharp edges or points on the cot that could risk injury to a child, or that clothing could catch on.
What tests must cots pass to meet the safety standard? New and second-hand cots must pass tests to check that a child's arms, legs or head will not get trapped in any holes or gaps in the cot. New cots must also pass tests for impact, strength, durability of access fastenings and dropside mechanisms, dropside load and stability.
Second-hand cots do not have to be tested for these issues. Who is responsible for testing the cots against the standard? In most cases it will be the manufacturer that carries out the tests and checks on cots to ensure they comply with the safety standard and the regulations, but you are liable for any cot you sell that may not be safe.
If you are concerned that a cot you have for sale may not have been properly tested, do not sell it. Ask your supplier to provide information about the safety tests.
What labels and markings must be on the cot? Information label The cot must come with an information leaflet, swing tag or external packaging that provides clear and complete assembly instructions and maintenance, safety and manufacturer's information.
These labelling requirements do not apply to second-hand cots. Marking on mattress base There must be manufacturer's information and warnings relating to the mattress size permanently marked on the mattress base. This marking requirement does not apply to second-hand cots. Plastic packaging warning label Flexible plastic packaging or wrapping around a cot requires warning labelling relating to the dangers of suffocation.
This labelling requirement does not apply to second-hand cots. If they do not carry a warning label, they will be considered second-hand cots and must comply with the relevant parts of the safety standard. This cot may not be suitable for use as a sleeping facility for infants or children.
It is your responsibility to make sure that any cot you offer for sale is safe and complies with the standard and the regulations. If you are in business, you should not assume that a cot complies with the standard and regulations simply because it has been offered for supply. The best way to make sure that the cot complies is to check whether it has already been tested and passed the requirements set out in the standard. Ask to see the test results.
I want to pass my second-hand cot on to a friend. Does the standard apply?
There comes a time when they need to move on though. It has worked for us a lot better than anything else.
You need to make sure your cot complies with the safety standard and regulations whether you are supplying the cot to a friend or to someone you don't know. Supply includes giving the cot to someone as a gift.
If you are in any doubt, do not sell it or give it away. You are personally liable if you supply any cot that does not comply with the safety standard. What happens if I sell a cot that does not comply? Supplying a cot that does not comply could place a child at risk of injury or death. You will have breached the regulations. It is an offence under section 30 of the Fair Trading Act to sell a cot that does not comply with the standard and the regulations.
In addition to any action taken by the Commerce Commission, you may have to conduct a recall of any cots that you have supplied which do not comply with the standard. Information on carrying out a product recall is available from the Consumer Protection website. Where can I get more information on the regulations and the standard?
You can access the regulations and the Fair Trading Act online at the government's legislation website. The information on this website is free.
You can buy a copy of the regulations and the Fair Trading Act from selected bookshops. Any toys attached to a cot must comply with the Product Safety Standard for children's toys.
В© 2016 - 2018 Business_Blog. All rights reserved | Template by W3layouts